ZY8605A
Multi-power high-bay family
- Power options by configuration
- 80 / 100 / 120 / 150 / 200 W
- Beam options
- 50° / 60° / 90°
- Input voltage
- 90 – 305 VAC
Industrial LED High Bay & Low Bay Lights
Match the beam to the working plane.
Compare industrial fixtures for high-bay, low-bay and equipment-area installations. Use mounting height, beam distribution and the work-plane target to guide selection.
Developed and manufactured by TORMIN.
Wenzhou, China · Since 2003.
Find the right configuration.
Selected series for different installation requirements.
ZY8601P
Compact area-light family
- Power options
- 30 / 40 / 50 / 60 / 80 W
- Rated voltage
- 100–240 V AC
- Ingress protection
- IP66
ZY8607P
Platform and corridor lighting
- Power options by configuration
- 25–80 W
- Beam options
- 60° / 80° / 100° / 200°
- CRI
- Ra 70 (80 optional)
ZY8603P
Equipment-room lighting
- Power options by configuration
- 25–80 W
- Beam options
- 40° / 60° / 80° / 100° / 200°
- CRI
- Ra 70 (80 optional)
Values are model- and configuration-specific. Confirm the selected variant and its complete technical documentation before ordering.
Compare the starting points.
Key differences to guide your enquiry. Open each product for its full specification.
| Series | Selection focus | Key specification | Configuration detail | Your enquiry |
|---|---|---|---|---|
| ZY8605A | Multi-power high-bay family | Power options by configuration80 / 100 / 120 / 150 / 200 W | Beam options50° / 60° / 90° | |
| ZY8601P | Compact area-light family | Power options30 / 40 / 50 / 60 / 80 W | Rated voltage100–240 V AC | |
| ZY8607P | Platform and corridor lighting | Power options by configuration25–80 W | Beam options60° / 80° / 100° / 200° | |
| ZY8603P | Equipment-room lighting | Power options by configuration25–80 W | Beam options40° / 60° / 80° / 100° / 200° |
ZY8605AMulti-power high-bay family
- Power options by configuration
- 80 / 100 / 120 / 150 / 200 W
- Beam options
- 50° / 60° / 90°
- Input voltage
- 90 – 305 VAC
ZY8601PCompact area-light family
- Power options
- 30 / 40 / 50 / 60 / 80 W
- Rated voltage
- 100–240 V AC
- Ingress protection
- IP66
ZY8607PPlatform and corridor lighting
- Power options by configuration
- 25–80 W
- Beam options
- 60° / 80° / 100° / 200°
- CRI
- Ra 70 (80 optional)
ZY8603PEquipment-room lighting
- Power options by configuration
- 25–80 W
- Beam options
- 40° / 60° / 80° / 100° / 200°
- CRI
- Ra 70 (80 optional)
Family ranges cover multiple versions; not every combination is available. Values shown retain the configuration qualifiers in the product documentation.
Start with your application.
Compare industrial fixtures for high-bay, low-bay and equipment-area installations. Use mounting height, beam distribution and the work-plane target to guide selection.
Discuss your requirementsMap the working area
Provide room dimensions, work-plane height and major obstructions.
Define the installation height
Record fixture height, spacing and the available mounting points.
Review the distribution
Compare beam options with the layout and request photometric data for a lighting calculation.
Confirm operating conditions
Specify voltage, ambient temperature, dust, moisture and control requirements.
Review the model.
Check the documents.
Use the exact model reference to bring the product data and your installation requirements together.
Available documents and approval scope vary by model and version.
A few practical questions.
Details that help move your selection forward.
Can wattage alone determine the number of luminaires?
No. Light distribution, mounting height, room geometry and the target illuminance all matter. Use model-specific photometric data for the final design.
Are these industrial fixtures automatically suitable for hazardous areas?
No. Industrial and Explosion Proof product ranges are separate. Use the hazardous-area range and exact-model documents where classification requires them.
Should every mounting height use the narrowest beam?
No. Beam choice depends on the full layout, spacing and working plane. Review coverage and uniformity together.
Let’s define your requirements.
Provide room dimensions, work-plane height and major obstructions. Include a model reference if you have one.
Already have a specification?
Include the required configuration, quantity and supporting document requirements in your message.