Explosion Proof
LED Floodlights

The right output.
The right light for your site.

Compare TORMIN explosion proof LED floodlights for local work areas, process installations and wider outdoor coverage. Review the series, supply and mounting options, then send your site requirements for a model-specific quotation.

Developed and manufactured by TORMIN.
Wenzhou, China · Since 2003.

BC9102S modular LED floodlight with adjustable mounting bracket
BC9102S Modular floodlighting

Find your floodlight.

Four series. Different outputs, supplies and installation options.

View all floodlights
TORMIN BC9101 LED floodlight

BC9101

Compact floodlighting

Compact luminaires for local work areas and installation points.

Power
25–80 W
Supply
90–305 VAC
Protection
IP66
View specifications
TORMIN BC9102S LED floodlight

BC9102S

Modular floodlighting

A modular series with a choice of outputs for industrial installations.

Power
60–300 W
Supply
120–240 VAC
Protection
IP66
View specifications
TORMIN BC9309S LED floodlight

BC9309S

Wide-area distribution

Dual-source floodlighting with two broad distribution options.

Power
240–480 W
Supply
200–277 VAC
Protection
IP66
View specifications
TORMIN BC9105 LED floodlight

BC9105

High-power floodlighting

A higher-power family for projects with larger lighting requirements.

Power
150 / 300 / 600 W
Supply
100–240 VAC
Protection
IP66
View specifications

Values refer to the listed series. Confirm the selected model and its applicable protection documentation before ordering. BC9105 also lists a separate 100 W sensing option.

A clear starting point.

Compare the essentials, then open a series for its complete configuration details.

SeriesPower optionsInput voltageSelection focusYour enquiry
BC910125–80 W90–305 VACSeat / side-wall mounting
BC9102S60–300 W120–240 VACBracket / side-wall mounting
BC9309S240–480 W200–277 VAC60° × 80° / 90° × 110°
BC9105150 / 300 / 600 W100–240 VACConfiguration on request
BC910125–80 W
Supply
90–305 VAC
Selection focus
Seat / side-wall mounting
BC9102S60–300 W
Supply
120–240 VAC
Selection focus
Bracket / side-wall mounting
BC9309S240–480 W
Supply
200–277 VAC
Selection focus
60° × 80° / 90° × 110°
BC9105150 / 300 / 600 W
Supply
100–240 VAC
Selection focus
Configuration on request

BC9101 also offers selected low-voltage configurations. Narrow-beam spotlight variants and street lights are separate selections.

Selection considerations

Choose a floodlight around the target area and aiming position before comparing wattage. The listed BC9101 configurations cover 25-80 W for compact installation points, while BC9309S offers 240-480 W with 60° x 80° or 90° x 110° distributions. These are different starting points for local work areas and wider outdoor coverage. Match the proposed supply to the selected series, then check bracket position, mounting height and obstructions against a dimensioned layout. For replacements, record the existing fixture and required illuminance rather than assuming equal watts mean equal coverage. Confirm the exact protection marking, temperature limits and certificate scope for the ordering code before specifying the luminaire.

Start with the site.
Then select the light.

A power rating is only part of the decision. These four details help us understand the installation and review the options with you.

Discuss your requirements
01

Hazardous-area requirements

Zone or classification, gas or dust group, temperature class and required certification.

02

Mounting and coverage

Mounting height, bracket position, working area and the direction the light needs to reach.

03

Light and power

Target illuminance, available supply and existing fixtures if this is a replacement project.

04

Operating conditions

Ambient temperature, corrosion exposure, quantity and the required project schedule.

Lighting where work happens.

Review each installation against its own environmental and hazardous-area requirements.

Industrial platform shown in the BC9101 catalogue

Platforms & local work areas

Position light around equipment, access points and maintenance tasks.

Process equipment shown in the BC9102S catalogue

Process installations

Consider mounting access, obstructions and exposure around operating equipment.

Night-time area lighting example in the BC9309S catalogue

Larger outdoor work areas

Match output and distribution to the mounting height and area to be illuminated.

Application imagery from the TORMIN product catalogue; shown as installation references.

TORMIN lighting assembly workshop
Lighting assembly
Photometric evaluation equipment at TORMIN
Laboratory evaluation

Know the product.
Check the evidence.

Bring the selected model and installation requirements together with the right technical documents. Our manufacturing and laboratory teams support the product evaluation process.

Open PDF

Certification scope and available documents vary by model and version.

A few practical
questions.

Details that help move your selection forward.

Are all configurations suitable for the same hazardous area?

No. Check the exact model, protection marking, gas or dust group, temperature class and permitted ambient range against the applicable documentation.

How do I choose wattage and beam distribution?

Start with mounting height, the task area and target illuminance. Share a dimensioned layout, obstructions and the working plane, then request photometric data for the proposed configuration. For an existing installation, use the retrofit site survey checklist to record the equipment and interfaces that will remain.

Can these replace existing metal halide floodlights?

Replacement depends on illuminance, distribution, mounting and the hazardous-area requirements. Send the existing lamp details and installation conditions for comparison.

Which documents should I request?

Request the model-specific datasheet, relevant certification documents, dimension drawings and available photometric data for the configuration being considered.

Let’s find the right
floodlight for your project.

Share your site conditions, mounting height and quantity. We’ll help you review the series and the information needed for a quotation.

Already have a specification?

Include the model, supply voltage and required documentation in your message.

Request a Quote

Fields marked * are required.

We use your details to respond to this enquiry. Read our Privacy Policy.

Tell us what you need.

Fields marked * are required.

Your details will be used to respond to this enquiry.