
BC9304P
80–150 W configurations
A compact high bay series. Review the existing model documentation for your required configuration.
- Power
- 80 / 100 / 120 / 150 W
- Supply
- 100–277 VAC
- Protection
- IP66
Light the space.
Focus on the work below.
Compare TORMIN explosion proof LED high bay lights for classified production and covered work areas. Review the series, optical options and mounting drawings, then request a quotation against your layout and model-specific documentation requirements.
Developed and manufactured by TORMIN.
Wenzhou, China · Since 2003.

Two series. Compare power, supply and installation requirements.

80–150 W configurations
A compact high bay series. Review the existing model documentation for your required configuration.

100–240 W configurations
A higher-output series with two catalogue distributions and model-specific mounting drawings.
Values refer to the published configurations of each series. Confirm the exact ordering code, mounting arrangement and applicable protection documents before ordering.
Compare the essentials, then open a series for its complete configuration details.
| Series | Power options | Input voltage | Selection focus | Your enquiry |
|---|---|---|---|---|
| BC9304P | 80 / 100 / 120 / 150 W | 100–277 VAC | Confirm optical version | |
| BC9307P | 100 / 120 / 150 / 200 / 240 W | 90–264 VAC | 80° / 100° distributions |
BC9304P values follow its existing product record. BC9307P offers 80° and 100° distributions; confirm available power and optical combinations in the model datasheet.
High bay selection starts with the distance between the luminaire and the working plane, together with roof structure, cranes and other obstructions. BC9304P lists 80, 100, 120 and 150 W configurations; BC9307P lists 100, 120, 150, 200 and 240 W configurations with 80° or 100° distribution options. Request the photometric file for the proposed combination and assess spacing against the actual task area. BC9307P catalogue drawings show pole and angled-wall arrangements, while BC9304P mounting details should be confirmed from its model drawings. Keep supply voltage, maintenance access and the classified-area documentation in the same enquiry so the optical and installation choices can be reviewed together.
A wattage alone does not define a lighting layout. These four details help us review the distribution, installation and documentation with you.
Discuss your requirementsZone or classification, gas or dust group, temperature class and required certification.
Mounting height above the work plane, roof structure, cranes, pipework and other obstructions.
Target illuminance, working-plane height, fixture spacing and any glare or uniformity requirements.
Supply voltage, mounting method, ambient temperature, corrosion exposure and maintenance access.
Review the working area and its classification before choosing the fixture and layout.

Plan overhead lighting around workstations, structural columns and equipment.

Consider aisle visibility, stacked materials and the classification of the stored goods.
Application imagery from the TORMIN product catalogue; shown as installation references.


Bring the selected model and installation requirements together with the right technical documents. Our manufacturing and laboratory teams support the product evaluation process.
Certification scope and available documents vary by model and version.
Details that help move your selection forward.
Start with mounting height above the work plane, task locations, obstructions and the required lighting criteria. Compare the proposed configuration’s photometric data and layout results. Where combustible dust is present, use the combustible-dust lighting guide to organize the separate area and equipment evidence.
Share the roof structure and available fixing points. BC9307P catalogue drawings show pole and angled-wall arrangements; confirm the hardware for your installation. Request the model-specific drawings for BC9304P.
No. Ingress protection and hazardous-area approval address different requirements. Check the exact model marking and applicable certification against the site classification and operating conditions.
Do not assume the same quantity or wattage will give the same result. Share the existing layout, fixture details and lighting target so distribution, spacing and installation constraints can be reviewed.
Send the mounting height, floor dimensions and lighting target. We’ll help you review a suitable series and prepare the information needed for a quotation.
Share a layout, existing fixture details or the required model and certification documents.