ZW7600 model information
| IP Rating | IP65 |
|---|
These values come from the supplied product record. Use the catalogue and model-specific documents to confirm the ordering configuration.
Product configurations & catalogue specifications
Original TORMIN catalogue reference. Values apply to the individual model and configuration shown; please confirm the ordering code and applicable documentation with our team.
ZW7600
| Product type | Railway Signal Light |
|---|---|
| Power options | 3 W |
| Catalogue location | PDF page 10 |
Additional product information and earlier documentation
Some specifications below may describe earlier or alternative configurations. Use the model-specific catalogue table above when reviewing this supplied edition.
Application
It is used at railway, aviation and other transportation area and some special fields, serving as signal indication, safety warning and normal illumination.
Characteristics
1. Engineering plastic shell, lightweight, suitable for long-time handheld operation;
2. Three colors of red, yellow, and green are used as the signal light configuration, and white illumination light is configured in the middle;
3. Equipped with a hand-held safety rope and strap, the tail is larger than the barrel, which is not easy to take off;
4. A small lamp is set at the rear for emergency lighting and direction indication;
5. 1-meter drop has no effect, the low-temperature environment works normally;
6. American CREE light source, high brightness and long lifetime.
Main specification
|
Specification |
Unit |
ZW7600 |
|
|
Rated voltage |
VDC |
3.7 |
|
|
Charging Voltage |
VAC |
100-240 |
|
|
Rated capacity |
mAh |
4400 |
|
|
Light Output |
lm |
170 |
|
|
Continuous runtime |
Lighting |
h |
≥10 |
|
Sign |
h |
>30 |
|
|
Recharging time |
h |
<6 |
|
|
Service Life |
h |
100,000 |
|
|
Battery Recharge Cycle |
Times |
≈1,000 |
|
|
Dimension |
External diameter |
mm |
Φ66 |
|
Length |
172 |
||
|
Net weight |
g |
265 |
|
Note: When the light is on, press any switch in the three colors of the lamp head for 2 seconds to illuminate the lamp,
and then press it to turn off.